ESS GTA 150kW+160kWh Integrated Solar & Storage System
De un vistazo
ESS GTA 150kW+160kWh Integrated Solar & Storage System pairs a 150kW grid-tied inverter with 160kWh LiFePO₄ storage; MPPT window —, transfer to island within ≤10 ms, air cooling and IP54. It serves PV self-consumption, peak shaving and critical-load backup in parks and distribution areas.
Características clave
- Rated power 150kW with 160kWh LiFePO₄ storage
- On/off-grid transfer within ≤10 ms
- MPPT window —, max. DC input —
- All-in-one cabinet build, air cooling, IP54 enclosure
- CAN / RS485 monitoring with EMS interface
Descripción del producto
The ESS GTA series integrates the PV inverter, the air cooling LiFePO₄ battery and the on/off-grid transfer unit in a single cabinet — covering self-consumption, peak shaving and backup power. Wiring and commissioning are done inside the cabinet, so site work is limited to positioning and paralleling.
The ESS GTA 150kW+160kWh runs at 512VDC with roughly 160kWh usable, measures 1000×1120×2100mm and weighs about 1370kg. Each cabinet is wired, insulation-tested and function-tested before shipment, so it can be specified and ordered once the load list and local grid requirements are confirmed.
- Rated power 150kW with 160kWh LiFePO₄ storage
- On/off-grid transfer within ≤10 ms
- MPPT window —, max. DC input —
- All-in-one cabinet build, air cooling, IP54 enclosure
Especificaciones
| Cell type | LiFePO₄ 磷酸铁锂 |
|---|---|
| Module configuration | 1P16S / 1P24S |
| Number of modules | 10 |
| Nominal voltage | 512VDC |
| Single cell capacity | 314Ah |
| Usable energy | 160kWh |
| Voltage range | 464~576VDC |
| Max. charge current | 157A |
| Max. discharge current | 144A |
| Rated power (on-grid) | 150kVA |
| Rated current (on-grid) | 217A |
| Rated voltage | 400V / 230V |
| Grid voltage range | -20%~+15% |
| Frequency range | 50Hz(47Hz~52Hz) / 60Hz(57Hz~62Hz) |
| Current harmonics | <5% |
| Protection | 过充 / 过放 / 过流 / 过温 / 短路 |
| Communication | CAN / RS485 |
| Cooling method | 智能风冷 Air cooling |
| Protection level | IP54 |
| Safety certification | UN38.3, IEC62619 |
| Storage temperature | 0℃~30℃（25℃ 可存放 6 个月） |
| Working temperature | 充电 0℃~+55℃；放电 -20℃~+55℃ |
| Humidity | 0~95%RH（无凝露） |
| Max. operating altitude | <4000m（2000m 以上降额） |
| Dimensions (W×D×H) | 1000×1120×2100mm |
| Weight | 1370kg |
Preguntas frecuentes del producto
What does the ESS GTA 150kW+160kWh system solve?
It bundles the PV inverter, battery and on/off-grid transfer into one cabinet, addressing four pain points: weak self-consumption, peak-valley arbitrage, limited transformer capacity and backup for critical loads — with far less site integration work.
How are critical loads protected during an outage?
The built-in transfer unit switches in ≤10 ms; off-grid output is — with 100 % unbalanced-load capability.
Can units be paralleled or the battery extended?
Yes, both parallel operation and battery extension are supported. The number of parallel units depends on busbar rating, protective devices and the local grid-connection permit, and is confirmed in the project single-line diagram.
How should the PV array be sized?
The MPPT window is — with — maximum DC input; string open-circuit voltage must stay below the stated limit.
Lead time and customisation?
Standard batches ship in 15-30 days; volume orders and customised models follow the contract. Appearance, protocols, grid-compliance packages and monitoring-platform interfaces can be adapted.
¿No está seguro de que la especificación sea la correcta?
Envíenos su plano, ficha técnica o muestra y nuestros ingenieros confirmarán la compatibilidad en 48 horas.
Productos relacionados
Casos y escenarios de aplicación
