ESS HVA 100kW+216kWh Integrated Solar & Storage System
De un vistazo
ESS HVA 100kW+216kWh Integrated Solar & Storage System pairs a 100kW grid-tied inverter with 216kWh LiFePO₄ storage; MPPT window 150V~950V, transfer to island within ≤10ms, air cooling and IP54. It serves PV self-consumption, peak shaving and critical-load backup in parks and distribution areas.
Características clave
- Rated power 100kW with 216kWh LiFePO₄ storage
- On/off-grid transfer within ≤10ms
- MPPT window 150V~950V, max. DC input 200kW
- All-in-one cabinet build, air cooling, IP54 enclosure
- CAN / RS485 monitoring with EMS interface
Descripción del producto
The ESS HVA series integrates the PV inverter, the air cooling LiFePO₄ battery and the on/off-grid transfer unit in a single cabinet — covering self-consumption, peak shaving and backup power. Wiring and commissioning are done inside the cabinet, so site work is limited to positioning and paralleling.
The ESS HVA 100kW+216kWh runs at 691.2VDC with roughly 216kWh usable, measures 1300×1210×1900mm and weighs about 2050kg. Each cabinet is wired, insulation-tested and function-tested before shipment, so it can be specified and ordered once the load list and local grid requirements are confirmed.
- Rated power 100kW with 216kWh LiFePO₄ storage
- On/off-grid transfer within ≤10ms
- MPPT window 150V~950V, max. DC input 200kW
- All-in-one cabinet build, air cooling, IP54 enclosure
Especificaciones
| Max. DC power | 200kW |
|---|---|
| Max. PV voltage | 1000V |
| PV startup voltage | 150V |
| MPPT voltage range | 150V~950V |
| Rated power (on-grid) | 100kVA |
| Rated current (on-grid) | 151.9A |
| Rated voltage | 3/N/PE, 220V / 380V, 230V / 400V |
| Frequency range | 50Hz / 60Hz |
| Current harmonics | <3% |
| Rated output power (off-grid) | 100kVA |
| Max. output power (off-grid) | 110kVA |
| Max. output current (off-grid) | 145.3A |
| Unbalanced load | 100% |
| Overload | 1.0 倍额定功率 10s；2 倍额定功率 200ms |
| Battery type | LiFePO₄ 磷酸铁锂 |
| Number of modules | 9 |
| Rated capacity | 314Ah |
| Max. charge/discharge current | 157A |
| Nominal voltage | 691.2VDC |
| Voltage range | 628.4~777.6VDC |
| Usable energy | 216kWh |
| On/off-grid switching time | ≤10ms |
| Protection level | IP54 |
| Operating temperature | 充电 0℃~+55℃；放电 -20℃~+55℃ |
| Humidity | 5~95%RH（无凝露） |
| Cooling method | 智能风冷 Air cooling |
| Max. operating altitude | <4000m（2000m 以上降额） |
| Dimensions (L×W×H) | 1300×1210×1900mm |
| Weight | 2050kg |
Preguntas frecuentes del producto
What does the ESS HVA 100kW+216kWh system solve?
It bundles the PV inverter, battery and on/off-grid transfer into one cabinet, addressing four pain points: weak self-consumption, peak-valley arbitrage, limited transformer capacity and backup for critical loads — with far less site integration work.
How are critical loads protected during an outage?
The built-in transfer unit switches in ≤10ms; off-grid output is 100kVA with 100% unbalanced-load capability.
Can units be paralleled or the battery extended?
Yes, both parallel operation and battery extension are supported. The number of parallel units depends on busbar rating, protective devices and the local grid-connection permit, and is confirmed in the project single-line diagram.
How should the PV array be sized?
The MPPT window is 150V~950V with 200kW maximum DC input; string open-circuit voltage must stay below 1000V.
Lead time and customisation?
Standard batches ship in 15-30 days; volume orders and customised models follow the contract. Appearance, protocols, grid-compliance packages and monitoring-platform interfaces can be adapted.
¿No está seguro de que la especificación sea la correcta?
Envíenos su plano, ficha técnica o muestra y nuestros ingenieros confirmarán la compatibilidad en 48 horas.
Productos relacionados
Casos y escenarios de aplicación
