ESS HVA 60kW+128kWh Integrated Solar & Storage System
概要
ESS HVA 60kW+128kWh Integrated Solar & Storage System pairs a 60kW grid-tied inverter with 128kWh LiFePO₄ storage; MPPT window 200V~800V, transfer to island within ≤10ms, air cooling and IP54. It serves PV self-consumption, peak shaving and critical-load backup in parks and distribution areas.
製品の特長
- Rated power 60kW with 128kWh LiFePO₄ storage
- On/off-grid transfer within ≤10ms
- MPPT window 200V~800V, max. DC input 38.4kW+38.4kW
- All-in-one cabinet build, air cooling, IP54 enclosure
- CAN / RS485 monitoring with EMS interface
製品説明
The ESS HVA series integrates the PV inverter, the air cooling LiFePO₄ battery and the on/off-grid transfer unit in a single cabinet — covering self-consumption, peak shaving and backup power. Wiring and commissioning are done inside the cabinet, so site work is limited to positioning and paralleling.
The ESS HVA 60kW+128kWh runs at 499.2VDC with roughly 128kWh usable, measures 1000×1210×1855mm and weighs about 1500kg. Each cabinet is wired, insulation-tested and function-tested before shipment, so it can be specified and ordered once the load list and local grid requirements are confirmed.
- Rated power 60kW with 128kWh LiFePO₄ storage
- On/off-grid transfer within ≤10ms
- MPPT window 200V~800V, max. DC input 38.4kW+38.4kW
- All-in-one cabinet build, air cooling, IP54 enclosure
仕様
| Max. DC power | 38.4kW+38.4kW |
|---|---|
| Max. PV voltage | 850V |
| PV startup voltage | 250V |
| MPPT voltage range | 200V~800V |
| Max. PV current | 64A×2 |
| Rated power (on-grid) | 66kVA |
| Rated current (on-grid) | 87A |
| Rated voltage | 400V / 230V |
| Voltage range | -20%~+15% |
| Frequency range | 50Hz(47Hz~52Hz) / 60Hz(57Hz~62Hz) |
| Current harmonics | <3% |
| Power factor | -1~1 |
| Rated output power (off-grid) | 60kVA |
| Max. output power (off-grid) | 66kVA |
| Rated output voltage (off-grid) | 400V / 230V |
| Unbalanced load | 100% |
| Battery type | LiFePO₄ 磷酸铁锂 |
| Number of modules | 8 |
| Rated capacity | 314Ah |
| Max. charge/discharge current | 157A |
| Nominal voltage | 499.2VDC |
| Voltage range | 371.2~460.8VDC |
| Rated energy | 128kWh |
| On/off-grid switching time | ≤10ms |
| Protection level | IP54 |
| Operating temperature | 充电 0℃~+55℃；放电 -20℃~+55℃ |
| Humidity | 5~95%RH（无凝露） |
| Cooling method | 智能风冷 Air cooling |
| Max. operating altitude | <4000m（2000m 以上降额） |
| Dimensions (L×W×H) | 1000×1210×1855mm |
| Weight | 1500kg |
製品FAQ
What does the ESS HVA 60kW+128kWh system solve?
It bundles the PV inverter, battery and on/off-grid transfer into one cabinet, addressing four pain points: weak self-consumption, peak-valley arbitrage, limited transformer capacity and backup for critical loads — with far less site integration work.
How are critical loads protected during an outage?
The built-in transfer unit switches in ≤10ms; off-grid output is 60kVA with 100% unbalanced-load capability.
Can units be paralleled or the battery extended?
Yes, both parallel operation and battery extension are supported. The number of parallel units depends on busbar rating, protective devices and the local grid-connection permit, and is confirmed in the project single-line diagram.
How should the PV array be sized?
The MPPT window is 200V~800V with 38.4kW+38.4kW maximum DC input; string open-circuit voltage must stay below 850V.
Lead time and customisation?
Standard batches ship in 15-30 days; volume orders and customised models follow the contract. Appearance, protocols, grid-compliance packages and monitoring-platform interfaces can be adapted.
適合する仕様か分からない場合は？
図面・データシート・サンプルをお送りください。48時間以内にエンジニアが適合性を確認します。
関連製品
適用事例とシーン
